Rockwill Electric Group
12kV 24kV 36kV Compact substation
12kV 24kV 36kV Compact substation Manufacturer in China Rockwill unit compact substation is widely running in worldwide,... ...

Detailed description

  • Description
  • 12kV/24kV/36kv Prefabricated Substation
  • 36kV/40.5kV Prefabricated Substation
  • Underground
  • Miniaturization Intelligent Prefabricated Substation

12kV 24kV 36kV Compact substation

Rockwill offer an environmentally responsible, high efficiency, safer choice. The units have high-fire-point fluid, providing fire safety benefits, and a projected life well beyond that of a traditional mineral-oil transformer. These efficient and cost-effective transformers use Envirotemp™ FR3™ fluid. Envirotran transformers are manufactured in 50 - 10,000kVA, in primary voltage classes of 11kV,15 kV, 25 kV and 35 kV.

kVA
50-20,000
Primary Voltage
Up to 34,500 V
Secondary Voltage
208-14,400 V

Three-phase, pad-mounted transformers, for use on underground power distribution systems, are best suited for commercial applications in public access areas and where underground service is required. These transformers meet modern design requirements for flexibility and provide a visually pleasing installation. Construction allows installation in locations accessible to the general public without the need for protective fencing or vaults. These units are ideally suited for apartment buildings, schools, hospitals, shopping centers, commercial buildings, or industrial sites.

 

Environmental Information

-Sealed tank construction

-Special waste disposal considerations

-Insulation temperature limit: 120 °C

-Temperature rise: 65 °C (standard); 55 °C or 55/65 °C (optional)

 

Special Design Options

-Special sound requirements

-Special altitude requirements

-Retrofit designs

-Higher efficiency requirements

-Special ambient conditions

 

Applicable Standards

-IEEE C57.12.00—Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

-IEEE C57.12.34—Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 2,500 kVA and Smaller: High Voltage, 34,500 GrdY/ 19,920 V and Below; Low Voltage, 480 V and Below

-IEEE C57.12.28—Standard for Pad-Mounted Equipment—Enclosure Integrity

-IEEE C57.12.70—Standard for Terminal Markings and Connections for Distribution and Power Transformers

-IEEE C57.12.80—Standard Terminology for Power and Distribution Transformers

-IEEE C57.12.90—Standard Test Code for Liquid-Immersed Distribution, Short-Circuit Testing of Distribution and Power Transformers

-IEEE C57.13—Requirements for Instrument Transformers

-ANSI/IEEE 386—Separable Insulated Connector Systems for Power Distribution Systems Above 600 V

-ASTM D877—Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

-NEMA AB1—Molded Case Circuit Breakers

-NEMA TR1—Transformers, Regulators, and Reactors

 

Main Designation Characteristics

The crust of the substation is designed according to the foreign advanced technology and physical reality. We provide many kinds of crust material such as aluminum alloy steel composite stainless steel board and non metal material(glass fiber).

The HV side use charge switch or vacuum circuit breaker. The transformer could be oil type hermetically-sealed type and dry type.

The proof of the box is double layers structure and between the layers is filled with foam. There are independent boards in HV and LV room, and in the transformer room will install auto thermal controller heater and cooling equipment.

Note: we offer special customized products according to client’s requirement.

Technical Service:

ROCKWILL®, China. Provide with best support

Tel: 0086-577-27869969

Email: barry@rockwill.cn

General

YB() series products is a kind of set of equipment which assembles the MV switch apparatus, transformer, LV distribution equipment together according to fixed connection scheme. This series substation is suitable for neighborhood unit, hotel, large-scale work site and high building that the voltage is 12kV /24kV/36kV/40.5kV, the frequency is 50Hz and the capacity is under 2500kvA.

Service environment

a) Air temperature: Maximum temperature: +40℃; Minimum temperature:-25℃
b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level: Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake

 

Main technical specifications

Name   Unit   HV equipment   Transformer   LV Equipment  
Rated voltage   kV   12/24/36   (12/24/36)/0.4   0.4
Rated current   A   630 3/75-150/3750 Less than 4000
Frequency   Hz   50
Rated Capacity   kVA   50-2500
Pfr withstand   kV   42/50/70/95 2.5
BIL   kV 75/125/170/185  
Crust Protection Grade     IP23 Oil type 55; dry type 65 IP23
Noisy Grade   dB      
Appearance Dimensions   mm According to primacy wiring circuit schema
HV Room   LV Room Transformer Room

 

Main Designation Characteristics

The crust of the substation is designed according to the foreign advanced technology and physical reality. We provide many kinds of crust material such as aluminum alloy steel composite stainless steel board and non metal material(glass fiber).

The HV side use charge switch or vacuum circuit breaker. The transformer could be oil type hermetically-sealed type and dry type.

The proof of the box is double layers structure and between the layers is filled with foam. There are independent boards in HV and LV room, and in the transformer room will install auto thermal controller heater and cooling equipment.

Note: we offer special customized products according to client’s requirement.

36kV/40.5kV Prefabricated Substation Characteristics

This type substations are the HV side 40.5 kV, LV side 0.4-12 kV and 3 phase outdoor completeequipment .It is wide used in cities , towns ,factories and oil fields, wharfs etc. It is also used insome construction sites. The characteristics are small volume, convenient installation, low cost,high automation safe and reliable operation. Substation is combined with HV switch room,LVswitch room, relay room and transformer room.

 

Main technical specifications for 36kV/40.5kV Prefabricated Substation

Name
Unit
HV equipment
Transformer
LV Equipment
Rated voltage
kV
40.5
40.5/12/0.69/0.4
12/6.3/0.69/0.4
Rated current
A
Less than 1250
 
Less than 4000
Frequency
Hz
50
Rated Capacity
kVA
1250-20000
Pfr withstand
kV
70/95
42/2.5(Auxiliary)
BIL
kV
170/185
75
Crust Protection Grade
 
IP23
Oil type 55; dry type 65
IP23
Noisy Grade
dB
 
 
 
Appearance Dimensions
mm
According to primacy wiring circuit schema
36kV/40.5kV prefabricated transformer substation

 

Main Primacy Wiring Circuit Schemas for Substation(40.5kV)

Note: we offer special customized products according to client’s requirement.

This equipments also belong to this Prefabricated substation category with a compact and special function of HV, LV and Transformer are all underground. People can enter into it through a well.

This substation is suitable for installing in square seeded strip and park The clients can choose half-buried type or whole-buried type.

Sketch map of half-buried substation

Sketch diagram of whole-buried substation

Miniaturization Intelligent Prefabricated Substation

This series pre-fabricated substation uses imported SF6 ring switch as its HV incoming and outgoing network realized the power ring system easily. And the substation selects integrated automation system which can realize unattended mode.

About Us

Success References